PP Diaphragm Valve Flange End, Thread End
We are the manufacturers & exporters of
PP Diaphragm Valve Flange End, Thread End
We are the manufacturers & exporters of PP Valves like PP Diaphragm Valve Flange End, PP Diaphragm Valve Thread End, PP Y Type Strainer Flange End, PP Y Type Strainer Thread End, PP Top Entry Valve & other PP Valves For Chemical industry, Power Plants, Sugar Industries, Pharmaceutical Plants, salt and Soda Ash Plants, paper & pulp industries, Swimming Ponds and fish farming, Beverage plants.
PP Diaphragm Valve Flange End Technical Specification :
| Construction | Weir type design, soft seated, raising stem |
| Standard | As per manufacturer’s |
| Connection End | Flanged as per ANSI B 16.5 (150#) & BS 10 (Table D/E/F) & DIN STD. |
PP Diaphragm Valve Thread End Technical Specification :
| Construction | Weir type design, soft seated, raising stem |
| Standard | As per manufacturer’s |
| Connection End | Screw end (BSP thread) |
M.O.C. Available :
PP (Polypropylene)
PARTHIV POLYMERS
Parthiv Polymers are the Manufacturers & exporters of Plastic Valves like PP/ hDPE / PPRC / PP-h / PVDF ball Valves, foot Valves, Non Retern Valves, PP flow Indicater, Diaphragm Valves, Butterfly Valves PP / HDPE / Valves pipe Fittings other Products.
RELATED PRODUCTS
INQUIRE HERE
PP Diaphragm Valve Flange End Dimensions (mm) (±2mm)
| Size: | Size: | ||||
| Inch | mm | OD | ID | L | T |
| ½ | 15 | 96 | 122 | 16 | 82 |
| ¾ | 20 | 100 | 122 | 17 | 105 |
| 1 | 25 | 112 | 141 | 20 | 114 |
| 1½ | 40 | 134 | 166 | 21 | 173 |
| 2 | 50 | 153 | 200 | 24 | 203 |
| 2½ | 65 | 184 | 245 | 24 | 218 |
| 3 | 80 | 184 | 245 | 24 | 218 |
| No | Description | Material | Qty. |
| P1 | Body | Polypropylene | 1 |
| P2 | Bonnet | Polypropylene | 1 |
| P3 | Diaphragm | Neoprene | 1 |
| P4 | Stem | M.S. / S.S. | 1 |
| P5 | Nut | M.S. / S.S. | 1 |
| P6 | Compressor | Aluminum / C.I. | 1 |
| P7 | Pin | M.S. / S.S. | 1 |
| P8 | Hand Wheel | Polypropylene | 1 |
| P9 | Nut, Bolt & Washer | M.S. / S.S. | 4 |
| P10 | Diaphragm Stud. | Brass | 1 |
| P11 | Cap | Polypropylene | 1 |
| Test Pressure | ||
| Body | Seat | Temp. |
| 10kg/cm² | 10kg/cm² | 80°C |
PP Diaphragm Valve Thread End Dimensions (mm) (±2mm)
| Size: | Size: | ||||
| Inch | mm | OD | ID | L | T |
| ½ | 15 | 96 | 122 | 16 | 82 |
| ¾ | 20 | 100 | 122 | 17 | 105 |
| 1 | 25 | 112 | 141 | 20 | 114 |
| 1½ | 40 | 134 | 166 | 21 | 173 |
| 2 | 50 | 153 | 200 | 24 | 203 |
